Easiest DIY Deck Lighting
Add custom-looking lights and update your deck with the easiest DIY deck lighting. No electricity is required.
When we bought our third fixer upper one of the highlights was that it came with a huge Trex deck on the back.
I was so excited to power wash this baby and create a beautiful outdoor living space, and one of the first things I did was figure out how to add lighting to the deck so that we could see where we were going when it was 10p at night.
After lots of searching, I found solar-powered LED deck post cap lights by GreenLighting.
As long as you have traditional deck posts (4×4 or 5×5), these are for you!
For more outdoor living inspiration be sure to check out:
Easiest DIY Deck Lighting
Before
Here is a close up of the post. Ours is a standard 4×4 post, and there are 10 around our deck.
If you have a 5×5 post, then you want these solar cap lights.
Easiest DIY Deck Lighting
You Will Need:
- Solar Cap Lights
- Power Drill
Easiest DIY Deck Lighting
#1. Remove the original post caps.
Easiest DIY Deck Lighting
#2. Firmly place the new solar light caps onto the top of the posts.
[show_boutique_widget id=”1060814″]
Easiest DIY Deck Lighting
#3. Drill the cap lights in place onto the posts.
The cap light will slide onto the top of the post, and then you take the screws that come with it and screw through the pre-drilled holes on 2 of the 4 sides.
And that is it.
SO.EASY.
I was truly amazed at how much light was generated by these solar-powered post lights. To note, we have a huge tree in our backyard, and the deck is north facing so we don’t even get a ton of sun on the deck.
Check out how they looked at 10p.
[show_boutique_widget id=”1060814″]
I couldn’t believe how bright they were. Even with the lights off in the house, it was the perfect amount of ambient lighting.
[UPDATE] Check out the outdoor living space now by clicking on the posts below:
No posts
Pin any of the images below for later, and shop this post.
Easiest DIY Deck lighting
Equipment
- Power Drill
Ingredients
- Solar Post Cap lights
Instructions
- Remove the original post caps.
- Firmly place the new solar light caps onto the top of the posts.
- Drill the cap lights in place onto the posts.
What a great idea! My husband and I are currently renovating our deck and just rented a dumpster which was a lifesaver. But now that we have a new deck we want some lighting without all the wiring headaches. This was such great inspiration for that. Thank you!
Oh wow! Good for you!