Illuminate a shelf, counter top, or any space with this super easy no wire under cabinet lighting solution.
|

Super Easy No Wire Under Cabinet Lighting Solution

Share With A Friend

Illuminate a shelf, counter top, or any space with this super easy no wire under cabinet lighting solution.

Super Easy No Wire Under Cabinet Lighting Solution

If you have been around here for any length of time, then you know how much I love coffee.

Every morning around 530am I enjoy a freshly ground and brewed cup of coffee at our coffee bar.

In an effort to decrease the number of times I have accidentally poured coffee on my hand due to the lack of early morning light, I added a simple, cost-effective, no wire solution.

For more kitchen inspiration be sure to check out:

Super Easy No Wire Under Cabinet Lighting Solution

This is the motion sensor LED light strip! So easy to install.

These lighting strips are the easiest solution!

Here is the before.

My intent was to install 3 strips above each of the shelves and the countertop.

1. Install 3 AA batteries.

2. Turn the light on and determine proper placement for optimal illumination.

Be sure to make a notation where the magnetic strip should be placed.

3. Remove the magnetic piece from the light.

4. Remove the sticky tape backing from the magnetic piece.

5. Press the magnetic piece to the shelf to adhere.

6. Attach the light to the holder.

After

Voila!

It has worked out beautifully! I highly recommend these LED light strips.

For more kitchen inspiration be sure to check out:

This image has an empty alt attribute; its file name is Screen-Shot-2021-04-03-at-1.52.54-PM.jpg

Pin any of the images below for later!

[show_boutique_widget id=”1072294″]

Easy No Wire Under Cabinet Solution

Ahna Fulmer // Hammers N Hugs
Illuminate a shelf, counter top, or any space with this super easy no wire under cabinet lighting solution.
Total Time 5 minutes
Servings 0

Instructions
 

  • Install 3 AA batteries.
  • Turn the light on and determine proper placement for optimal illumination.
  • Remove the magnetic piece from the light.
  •  Remove the sticky tape backing from the magnetic piece.
  • Press the magnetic piece to the shelf to adhere.
  •  Attach the light to the holder.
Tried this recipe?Let us know how it was!

Share With A Friend

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Recipe Rating